The HD6 is the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
| Version | HD6 |
| Frame Material | Carbon front and rear triangle |
| Frame Weight | A size large HD6 frame with an X2 weighs 7.7 lbs / 3.5kg |
| Wheel Size | 29/27.5” mixed wheelsize, up to 2.5" tire clearance |
| Front Travel | 180mm |
| Rear Travel | 165mm |
| Shock Specs | 230 x 65mm |
| Shock Eyelet Hardware | 25mm x 8mm front / 15mm x 8mm rear |
| Boost Axles | 148mm rear / 110mm front |
| Seatpost Diameter | 34.9mm |
| Rear Brake | 180mm Post mount / 220mm max rotor |
| Chainstay Length | 435mm |
| Bottom Bracket | Threaded (73mm BSA) |
| Chainline | 55mm chainline |
| Chainring | 30T - 34T |
| Derailleur Hanger | SRAM UDH |
| ISCG 05 Compatible | ISCG 05 Tab Mount available separately |
| Headset | ZS44 upper / ZS56 lower |
| Colors | Traffic Cone Orange, Enchanted Forest Green or Lavender Haze |
| Sizes | 1 / 2 / 3 / 4 / 5 |
| Frame Warranty | Lifetime |
-
Standard Shock
HD6 Specific FAQs
Yes, all Ibis bicycles ship with a Traction Tune rear shock. The compression and rebound tune is lighter compared to an off the shelf Fox Float X2.
The HD6 is rated for 180-190 mm suspension forks.
The HD6 is optimized around a 44mm offset fork. A 51mm offset fork shortens the trail (the distance between the contact patch and the steering axis), which can cause the front end to feel less stable.
The HD6 has a 55mm chainline.
55mm chainline cranksets include:
Sram Dub Wide Cranksets.
Shimano 120 Series Cranksets, or 125 in the case of XTR
A variety of other manufacturers offer 55mm chainline cranksets. Verify with your preferred crankset manufacturer before purchasing and installing.
Check out our Bottom Bracket installation guide for 55mm chainline cranksets here.
No, the HD6 is a dedicated mixed wheel bike. A 29” wheel will not fit. The use of a 29” rear wheel will void the frame’s warranty.
Yes! Our new upper link driven suspension design supports any 230 x 65mm coil shock.
Most 27.5” x 2.5” tires will fit on the HD6. Always verify there is a minimum of 8mm of clearance between the frame and tire at the tightest point before riding.
The maximum round chainring on the HD6 is a 36T. The minimum round chainring on the HD6 is a 30T.
Yes, the max size oval chainring we recommend is a 34T. Not all oval chainrings are the same, so we recommend double checking clearance before installation.
26 oz Purist water bottle (with an Arrundale Side Loader Cage, available on our webstore) fits on all frame sizes, except the size 1 / small, which can accommodate a 22 oz Purist bottle.
A size large HD6 frame with an X2 weighs 7.7 lbs / 3.5kg. Our complete builds (size large) begin at 31.66 lbs (14.54 kg) with all frame protection installed and sealant in the tires.
You can find torque specs for the HD6 in the tab on the right.
The HD6 uses a 180mm post mount rear brake mount.
To run a 180mm rotor, you'll use the shimano caliper bolts. No adapter is needed.
To run a 203mm rotor, you'll use the following Shimano part number: SM-MA-F203P / P
For more information, the following is a link to the adaptor chart:
Yes it does. Pork Chop Frame Bags are available here.
Many of our paints are available online via My Perfect Color. Some automotive retailers have the ability to custom match paint.
The PMS color codes for our frames are:
- Lavender Haze:
- Front: PMS 7446, Gloss
- Rear: PMS 2379, Matte
- Emerald Forest Green:
- Front: NA, this is a custom matte paint
- Rear: PMS Black, Matte
- Traffic Cone Orange:
- Front: PMS 172, Gloss
- Rear: PMS 446, Matte
General FAQs
To see our general FAQs click here.
180mm Fork (593.7mm axle to crown)
| Nominal Size | 1 | 2 | 3 | 4 | 5 | |
|---|---|---|---|---|---|---|
| Seat Tube Length | A | 400 15.7 | 400 15.7 | 406 16 | 450 17.7 | 470 18.5 |
| Top Tube Length | B | 585 23 | 610 24 | 630 24.8 | 655 25.8 | 685 27 |
| Head Tube Length (4mm stack of lower cup not included) | C | 81 3.2 | 86 3.4 | 91 3.6 | 100 3.9 | 115 4.5 |
| Chainstay Length | D | 435 17.1 | 435 17.1 | 435 17.1 | 435 17.1 | 435 17.1 |
| Seat Tube Angle | E | 76° 76° | 76° 76° | 76.5° 76.5° | 77° 77° | 77.5° 77.5° |
| Head Tube Angle | G | 64° 64° | 64° 64° | 64° 64° | 64° 64° | 64° 64° |
| Wheelbase | H | 1202 47.3 | 1228 48.3 | 1256 49.4 | 1288 50.7 | 1328 52.3 |
| BB Height (with 2.5WT Maxxis Assegai tires) | 345 13.6 | 345 13.6 | 345 13.6 | 345 13.6 | 345 13.6 | |
| BB Drop | K | 30 1.2 | 30 1.2 | 30 1.2 | 30 1.2 | 30 1.2 |
| Stack | I | 621 24.4 | 625 24.6 | 630 24.8 | 638 25.1 | 651 25.6 |
| Reach | J | 430 16.9 | 454 17.9 | 480 18.9 | 508 20 | 541 21.3 |
| Saddle height for seat tube angle | F | 650 25.6 | 700 27.6 | 745 29.3 | 790 31.1 | 830 32.7 |
| Standover | L | 725 28.5 | 735 28.9 | 752 29.6 | 765 30.1 | 769 30.3 |
| Trail | 136 5.4 | 136 5.4 | 136 5.4 | 136 5.4 | 136 5.4 | |
| Fork Offset | 44 1.7 | 44 1.7 | 44 1.7 | 44 1.7 | 44 1.7 |
Sizing Guide (Rider Height)
Dropper Post Saddle Height Calculations
Do not try to insert your post deeper than these measurements. Forcing the post can result in a seat tube failure.
IMPORTANT: Before riding, check the saddle to tire clearance with the dropper post fully dropped and the air out of the shock with frame compressed to bottom out.
| Frame measurement | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| Maximum Seatpost Insertion (mm) | 250 | 280 | 290 | 300 | 300 |
Bike Yoke Revive
Measurement from center BB to center of saddle rail (mm)
| Drop | Min/Max | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|
| 125 | Min | 567 | 567 | 573 | 617 | 637 |
| Max | 685 | 685 | 691 | 735 | 755 | |
| 160 | Min | 602 | 602 | 608 | 652 | 672 |
| Max | 735 | 735 | 741 | 785 | 805 | |
| 185 | Min | 635 | 626 | 632 | 676 | 696 |
| Max | 755 | 755 | 761 | 805 | 825 | |
| 213 | Min | 700 | 670 | 666 | 705 | 725 |
| Max | 820 | 820 | 826 | 870 | 890 |
KS RAGEi
Measurement from center BB to center of saddle rail (mm)
| Drop | Min/Max | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|
| 125 | Min | 581 | 581 | 587 | 631 | 651 |
| Max | 678 | 678 | 684 | 728 | 748 | |
| 150 | Min | 606 | 606 | 612 | 656 | 676 |
| Max | 718 | 718 | 724 | 768 | 788 | |
| 170 | Min | 627 | 627 | 633 | 677 | 697 |
| Max | 751 | 751 | 757 | 801 | 821 | |
| 190 | Min | 661 | 647 | 653 | 697 | 717 |
| Max | 781 | 781 | 787 | 831 | 851 |
Reverb AXS
Measurement from center BB to center of saddle rail (mm)
| Drop | Min/Max | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|
| 125 | Min | 590 | 590 | 596 | 640 | 660 |
| Max | 710 | 710 | 716 | 760 | 780 | |
| 150 | Min | 615 | 615 | 621 | 665 | 685 |
| Max | 760 | 760 | 766 | 810 | 830 | |
| 170 | Min | 635 | 635 | 641 | 685 | 705 |
| Max | 800 | 800 | 806 | 850 | 870 |
| Hardware | Torque Spec (Nm) | Thread Treatment / Notes |
|---|---|---|
| Suspension | ||
| Forward Shock Mount Bolts | 10 | Loctite 243 on threads, grease on the shaft |
| Rear Shock to clevis bolt | 20 | Titanium Bolts: Loctite 243 on threads, Ti anti-seize on the shaft and underside of the bolt head |
| Linkage | ||
| Upper link to front triangle | 20 | Loctite 243 on threads (if no green threadpatch), grease on flange |
| Upper Link to Clevis | 20 | Loctite 243 on threads, grease under bolt head |
| Upper link to rear triangle | 35 | Loctite 243 on threads, grease under bolt head |
| Lower Link 4mm Side Preload Bolts | 2 | Loctite 243 on threads, grease under bolt head |
| Lower Link 5mm Pinch Bolts | 10 | Loctite 243 |
| Misc | ||
| Rear Brake Caliper | 6 | Loctite 243 |
| Seat Binder | 6 | Grease |
| Derailleur Hanger Bolt | 25 | Dry (reverse thread!) |
| Rear Axle | 12 | Grease |