Upgrades available for the X9 build kit:

Brakes

Standard
Select an upgrade.
203/180 Rotor Upgrade - info
203/180 Rotor Upgrade +$49.99
Upgrade your brakes to a 203 Front rotor and 180 Rear. Includes rotor and adapter for the front and uses your existing front rotor and adapter for the rear.

Fork

Standard
Select an upgrade.
- info

+$200.54
2013 Fox Talas 34mm CTD 160–130mm - info
2013 Fox Talas 34mm CTD 160–130mm +$185.68
1. Black
2. Kashima Coat
3. 15QR thru-axle
4. Tapered steerer
Fox Talas 36mm RC2 180–140mm - info
Fox Talas 36mm RC2 180–140mm +$336.22

Note: this fork upgrade also requires the 203/180mm Rotor upgrade.
1. Black
2. Kashima Coat
3. 20QR thru-axle
4. Tapered steerer

Shock

Standard
Select an upgrade.
Fox Kashima DHX RC4 Coil - info
Fox Kashima DHX RC4 Coil +$164.59
Fox's DHX RC4 is their flagship, purpose-built downhill shock specifically engineered to meet the demands of the athletes who make the world's most incredible downhill courses look simple. Now with Kashima coating!
1. Externally adjustable velocity sensitive damping (DSC)
2. Kashima Coated Shaft
3. High-speed compression
4. Low-speed compression
5. Bottom-out force adjust (via schraeder)
6. Bottom-out progressiveness (via Bottom-out control knob)
7. Coil spring preload
8. Rebound
9. Boost Valve for position sensitive bottom-out control
10. Increased oil flow to allow wider range of tuning
11. Increased shaft size for reduced internal pressures

Wheels

Standard
Select an upgrade.
Crank Brothers Iodine3 Blk/Orange - info
Crank Brothers Iodine3 Blk/Orange +$725.99
Strong and light, hand built All Mountain wheelset in black with orange accents.
1. Compatible with tubeless and regular tires
2. Light weight at 1765g for the pair
3. Rim width - 21mm / recommended tire size 2.3-2.5
4. Rim material: 6061-t6 aluminum
5. Freehub uses 6 oversized pawls with alternating 3-pawl engagement
6. Butted Sapim Stainless Steel spokes and 7075 - T6 alloy nipples
7. Rear hub shell uses 4 cartridge bearings; 135 x10mm qr or 142 x12mm thru axle
8. Front hub shell uses 2 cartridge bearings; qr15 or 20mm thru axle, 9mm qr kits available
9. Rear split qr included where applicable
10. 6 bolt IS disc fitting
11. Warranty 2 years
Easton Carbon Haven - info
Easton Carbon Haven +$2158.99

Seatpost

Standard
Select an upgrade.
KS LEV Remote - info
KS LEV Remote +$365.69
The LEV from KS has 5 inches of remotely adjustable seatpost travel. Note, the post pictured in our builder is a KS Supernatural, not a LEV.
1. 125mm height adjustment/380mm length
2. 5 plus years of dirt-pounding refinement
3. Carbon fiber remote lever
4. Zero Offset ? Standard rail
5. Black anodized mast and head w/ hard anodized stanchion
6. Note, the post pictured in our builder is a KS Supernatural, not a LEV. The one to the left is a LEV

Build Kit: X9 + $2248.12

Component Type	Standard Component
Fork	2013 Fox Float 34 CTD 160mm travel, Kashima Coat, 15QR thru-axle, tapered steerer, black
Shock	2013 Fox Float CTD Adjust Factory Series with Kashima Coat
Wheels	Stan's Rapid rims with Speed-Tuned hubs
Tires	Specialized Fast Trak / Purgatory 2Bliss Ready
Brakes	Formula RX0 180mm Front Rotor, 160mm Rear Rotor
Cranks	SRAM X9 2 X 10 39-26
Rear Derailleur	SRAM X9 TYPE 2 Long Cage 10sp Black/Gray
Front Derailleur	SRAM X9 High-Direct-Mount 2x10 FD w/ Problem Solvers 34.9 Clamp to High-Direct adapter.
Shift Levers	SRAM X7 Trigger
Cassette	SRAM X9 12-36
Headset	Cane Creek 40: ZS44 1 1/8" top/EC49/40 Traditional 1.5" bottom
Handlebar	Ibis DH Bar 31.8 AL-7075 T6 4 x 9 deg bend 710 mm wide 270g
Stem	Ibis 3D Forged 31.8 Bar/28.6 Steerer 7075 (70, 80, 90, 100, 110, 120, 130)
Seatpost	Ibis 31.6 x 350 L, 7075 220g
Saddle	WTB Rocket-V

Pricing and specications subject to change without notice. All prices are ex-works Santa Cruz, CA USA and are listed in US dollars.